Welcome to Prosurge Lightning and Surge Protection manufacturer and solution provider!
Products

ETL (Intertek) certified Type 1CA 100kA SPD for N-PE application

Product Name: ETL (Intertek) certified Type 1CA 100kA SPD for N-PE application
Part Series: G100E/XXX(-S)
Application: EV charging stataion, wind turbine, PV system, LED displays, lighting application, railway system etc
Description: G100E /(150-440) Imax 100kA,For type 1 application for N-PE application

Features of  G100E series:

Type1CA surge protective device especially designed for low-voltage power supplysystem at the boundaries from lightning protection zone 1-2 and higher.

Ø         For type 1 application for N-PE application

Ø         ETL certified surge protector according to UL1449-4th

Ø        Pluggable design with window fault indication

Ø        Nominal discharge current In 20kA 8/20 per pole, maxdischarge current Imax 100kA 8/20

Ø         High reliability with special arc-extinguish device

Technical specification :

In accordance with

UL1449-4th

Category IEC/VDE/UL

Type1CA

Max. continuous operating voltage  Uc(VAC)

150

255

350

440

Nominal discharge current(8/20) In

20kA

Max. discharge current(8/20) Imax

100kA

Voltage protection level

@ VPR

<1200V

<1500V

<1800V

<2000V

Response time

100 ns

Operating temperature range

- 40ºC ~ + 80ºC

Cross-section of connection wire

Single-strand 35mm2; multi-strand 25mm2

Mounting

35mm DIN-rail in accordance with EN 50022/DIN46277-3

Enclosure material

thermoplastic; extinguishing degree UL94 V-0

Degree of protection

IP20

Installation width

2 modules, DIN 43880

Thermal disconnector

Internal  green – normal ; red - failure

Remote alarm contact

Optional

Approvals, Certifications

ETL/CE

Additional data for Remote Alarm Contacts

Remote alarm contact type

Isolated Form C

Switching capability Un/In

AC: 250V/0.5A     DC: 250V/0.1A; 125V/0.2A; 75V/0.5A

Max. Size of connecting wire

Max. 1.5mm2(or # 16AWG)

Modular combination guide:

G100E/150, G100E/255, G100E/350, G100E/440. Prosurge HIT ETL approved Din-rail Surge Protective Devices, Uc:150-440Vac, Limp: 100kA 8/20 for N-PE only, equivalent to ... .

Dimension & Circuit diagram :